Poparpaint Water tushen Fentin bangon Wuta na roba

Theoretical fenti amfani (30μm bushe fim)
10㎡/L/Layer (ainihin adadin ya bambanta dan kadan saboda rashin ƙarfi da porosity na tushe Layer).

Dilution
Ba a ba da shawarar narkewa da ruwa ba.

Tsarin sutura da lokutan rufewa
♦ Tsaftace tushe: cire ragowar slurry da abin da aka makala a bango, kuma amfani da spatula don felu bangon, musamman ma kusurwoyi na firam ɗin taga.
♦ Kariya: Kare firam ɗin ƙofa da tagogi, bangon labulen gilashi, da samfuran da aka gama da su ba tare da buƙatar gini ba kafin ginawa don guje wa gurɓatacce.
♦ Gyaran Putty: Wannan shine mabuɗin jiyya na tushe.A halin yanzu, sau da yawa mukan yi amfani da bangon bango na waje mai hana ruwa ko kuma bangon bango mai sassauƙa.
♦ Sandpaper nika: Lokacin yashi, yawanci shine don goge wurin da aka haɗa putty.Lokacin niƙa, kula da fasaha kuma bi ƙayyadaddun aiki.Yi amfani da rigar emery na ruwa don takarda yashi, kuma yi amfani da raga 80 ko raga 120 don yashi Layer ɗin.
♦ Sashe na gyaran gyare-gyare: Bayan tushen tushe ya bushe, yi amfani da putty don gano rashin daidaituwa, kuma yashi zai zama lebur bayan bushewa.Ya kamata a zuga kayan da aka gama da kyau kafin amfani.Idan putty yayi kauri sosai, zaku iya ƙara ruwa don daidaita shi.
♦ Cikakkun kayan shafa: Saka abin da aka sanya a kan pallet, goge shi da tawul ko squeegee, da farko sama sannan ƙasa.Scrap da kuma amfani da sau 2-3 bisa ga yanayin tushe Layer da buƙatun kayan ado, kuma putty bai kamata ya kasance mai kauri ba kowane lokaci.Bayan ya bushe, sai a goge shi da takarda mai yashi akan lokaci, kuma kada ya kasance mai kauri ko barin alamar niƙa.Bayan an goge abin da aka saka, share ƙurar da ke iyo.
♦ Gine-gine na farko: yi amfani da abin nadi ko jeri na alƙalami don yin goga a daidai gwargwado sau ɗaya, a kula kar a rasa goga, kuma kar a yi kauri sosai.
♦ Gyaran bayan fenti na anti-alkali sealing primer: Bayan anti-alkali sealing primer ya bushe, wasu ƙananan tsagewa da sauran lahani a bango za su bayyana saboda kyakkyawan raƙuman maganin alkali.A wannan lokacin, ana iya gyara shi tare da acrylic putty.Bayan bushewa da gogewa, sake sake amfani da madaidaicin alkali don hana rashin daidaituwar tasirin fenti na kishiyar saboda gyaran da aka yi a baya, don haka ya shafi tasirinsa na ƙarshe.
♦ Gine-gine na Topcoat: Bayan an buɗe saman saman, motsawa a ko'ina, sa'an nan kuma tsarma da motsawa daidai daidai da rabon da aka buƙata ta samfurin samfurin.Lokacin da ake buƙatar rabuwar launi a bango, fara fitar da layin raba launi tare da jakar layin alli ko maɓuɓɓugar tawada, kuma barin 1-2cm na sarari a ɓangaren launi lokacin yin zanen.Wani mutum da farko yana amfani da buroshin abin nadi don tsoma fenti daidai gwargwado, dayan kuma ya yi amfani da goga na jere don daidaita alamar fenti da fenti (ana iya amfani da hanyar yin fenti).Ya kamata a hana kasa da kwarara.Kowane fenti ya kamata a fentin daga gefe zuwa wancan gefe kuma a gama shi ta hanyar wucewa ɗaya don guje wa dunƙule.Bayan gashin farko ya bushe, shafa fenti na biyu.
♦ Kammala tsaftacewa: Bayan kowane gini, rollers da goge ya kamata a tsaftace, bushe kuma a rataye su a wurin da aka tsara.Sauran kayan aiki da kayan aiki, irin su wayoyi, fitilu, tsani, da dai sauransu, yakamata a mayar da su cikin lokaci bayan an kammala ginin, kuma kada a sanya su ba da gangan ba.Ya kamata a tsaftace kayan aikin injina kuma a gyara su akan lokaci.Bayan an kammala ginin, a kiyaye tsafta da tsaftar wurin, sannan a tsaftace wuraren da aka gurbata da kayan aikin a kan lokaci.Fim ɗin filastik ko tef ɗin da ake amfani da shi don kare bango ya kamata a tsaftace kafin a wargajewa.

Sharuɗɗan aikace-aikace
Don Allah kar a yi amfani da shi a cikin rigar ko sanyi (zazzabi yana ƙasa da 5 ° C kuma ƙimar dangi yana sama da 85%) ko tasirin abin da ake sa ran ba zai samu ba.
Da fatan za a yi amfani da shi a wuri mai kyau.Idan da gaske kuna buƙatar yin aiki a cikin rufaffiyar muhalli, dole ne ku shigar da samun iska kuma kuyi amfani da na'urorin kariya masu dacewa.

Lokacin kulawa
Kwanaki 7 / 25 ° C, ƙananan zafin jiki (ba ƙasa da 5 ° C) ya kamata a tsawaita yadda ya kamata don samun tasirin fim ɗin fenti mai kyau.

Fushi mai foda
1. Cire murfin foda daga saman kamar yadda zai yiwu, kuma sake daidaita shi tare da putty.
2. Bayan putty ya bushe, santsi tare da takarda mai kyau kuma cire foda.

m surface
1. Shebur tare da spatula da yashi tare da yashi don cire mildew.
2. A goge sau 1 tare da ruwan wankan da ya dace, kuma a wanke shi da ruwa mai tsabta a cikin lokaci, kuma bar shi ya bushe gaba daya.

Kayan Aikin Kaya
Da fatan za a yi amfani da ruwa mai tsabta don wanke duk kayan aiki akan lokaci bayan tsayawa a tsakiyar zane da bayan zanen.

Bayanin marufi
20KG

Hanyar ajiya
Ajiye a cikin ɗakin ajiya mai sanyi da bushe a 0 ° C-35 ° C, kauce wa faɗuwar ruwan sama da rana, kuma hana sanyi sosai.Ka guji yin tari da yawa.